EIGRP ROUTING PROTOCOL

Download The Pkt File:
Download




EIGRP:

EIGRP Between 3 Routers and 2 PC

                                       

PC0:

  
                                
PC1:

                  
                                       
Router 1:

Router>en
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#int
Router(config)#interface fa
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip add
Router(config-if)#ip address 172.30.40.1 255.255.255.252
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

Router(config-if)#exit
Router(config)#int
Router(config)#interface fa
Router(config)#interface fastEthernet 0/0/0
%Invalid interface type and number
Router(config)#int
Router(config)#interface eth
Router(config)#interface ethernet 0/0/0
Router(config-if)#ip add
Router(config-if)#ip address 192.168.1.1 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface Ethernet0/0/0, changed state to up

%LINEPROTO-5-UP-DOWN: Line protocol on Interface Ethernet0/0/0, changed state to up

Router(config-if)#exit
Router(config)#int
Router(config)#interface fa
Router(config)#interface fastEthernet 0/1
Router(config-if)#ip add
Router(config-if)#ip address 172.30.60.1 255.255.255.252
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

Router(config-if)#exit
Router(config)#do wr
Building configuration...
[OK]
Router(config)#

Router 2:

Router>en
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#int
Router(config)#interface fa
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip add
Router(config-if)#ip address 172.30.50.1 255.255.255.252
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

Router(config-if)#exit
Router(config)#int
Router(config)#interface fa
Router(config)#interface fastEthernet 0/1
Router(config-if)#ip add
Router(config-if)#ip address 172.30.60.2 255.255.255.252
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

%LINEPROTO-5-UP-DOWN: Line protocol on Interface FastEthernet0/1, changed state to up

Router(config-if)#exit
Router(config)#int
Router(config)#interface e
Router(config)#interface ethernet 0/0/0
Router(config-if)#ip add
Router(config-if)#ip address 192.168.2.1 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface Ethernet0/0/0, changed state to up

%LINEPROTO-5-UP-DOWN: Line protocol on Interface Ethernet0/0/0, changed state to up

Router(config-if)#exit
Router(config)#do wr
Building configuration...
[OK]
Router(config)#

Router 0:


Router>en
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#int
Router(config)#interface fa
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip add
Router(config-if)#ip address 172.30.40.2 255.255.255.252
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UP-DOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#exit
Router(config)#int
Router(config)#interface fa
Router(config)#interface fastEthernet 0/1
Router(config-if)#ip add
Router(config-if)#ip address 172.30.50.2 255.255.255.252
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

%LINEPROTO-5-UP-DOWN: Line protocol on Interface FastEthernet0/1, changed state to up

Router(config-if)#exit
Router(config)#do wr
Building configuration...
[OK]
Router(config)#

Router 1 EIGRP:

Router>en
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#rou
Router(config)#router eigrp 10
Router(config-router)#net
Router(config-router)#network 172.30.40.0 255.255.255.252
Router(config-router)#network 172.30.60.0 255.255.255.252
Router(config-router)#network 192.168.1.0 255.255.255.0
Router(config-router)#exit
Router(config)#do wr
Building configuration...
[OK]
Router(config)#

Router2 EIGRP:

Router>en
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#rou
Router(config)#router eigrp 10
Router(config-router)#net
Router(config-router)#network 172.30.50.0 255.255.255.252
Router(config-router)#network 172.30.60.0 255.255.255.252
Router(config-router)#
%DUAL-5-NBRCHANGE: IP-EIGRP 10: Neighbor 172.30.60.1 (FastEthernet0/1) is up: new adjacency

Router(config-router)#network 192.168.2.0 255.255.255.0
Router(config-router)#exit
Router(config)#do wr
Building configuration...
[OK]
Router(config)#


Router 0 EIGRP:

Router>en
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#rou
Router(config)#router eigrp 10
Router(config-router)#net
Router(config-router)#network 172.30.40.0 255.255.255.252
Router(config-router)#
%DUAL-5-NBRCHANGE: IP-EIGRP 10: Neighbor 172.30.40.1 (FastEthernet0/0) is up: new adjacency

Router(config-router)#network 172.30.50.0 255.255.255.252
Router(config-router)#
%DUAL-5-NBRCHANGE: IP-EIGRP 10: Neighbor 172.30.50.1 (FastEthernet0/1) is up: new adjacency

Router(config-router)#exit
Router(config)#do wr
Building configuration...
[OK]
Router(config)#